Bonnet Scoop for T6 2012-2016 Ford Ranger
- Matte Black Finish
- 3m Adhesive Tape Fitting
- Full-Size Version
- Fits 2012 to 2016 Ford Rangers
- Installation time c.30-minutes
The bonnet scoop adds an aggressive individual look to your Ranger.
It is manufactured from high-quality composite matte black ABS material.
Easily fitted in under 30 mins.
- Simply clean and dry the bonnet
- Degrease only the 3M tape contact area with an alcoholic wipe or brake cleaner
- Test fit prior to removing the 3M backing tape and mark its location with lots of masking tape
- Remove the 3M backing tape, re-position and press down firmly.
- Rub the outer edges to ensure good consistent adhesion has occurred.
If the outside ambient temperature is below 15% degrees warm the bonnet and the scoop with a hairdryer/heat gun gently prior to installation. This promotes improved adhesion.
;){kind=link}