Only 4 Left
Bonnet styling, custom-made to fit the Toyota Hilux. Take pickup customisation to another level with this easy-to-fit vented bonnet scoop, it completes the vehicle transformation and adds a menacing appearance.
Installation tips:
Simply clean and dry the bonnet
Degrease only the 3M tape contact area with an alcoholic wipe or brake cleaner Apply 3M primer to promote adhesion test fit prior to removing the 3M backing tape and mark its location with lots of masking tape
Remove the 3M backing tape, re-position and press down firmly.
Rub the outer edges to ensure good consistent adhesion has occurred.
If the outside ambient temperature is below 15 degrees warm the bonnet area and the scoop with a hairdryer/heat gun gently prior to installation. This promotes improved adhesion.
Ensure the product is firmly secure before driving.
Toyota Hilux 2016- Lazer Lamps LED Roof Light Integration in 218 Black
;){kind=link}