The bonnet hood scoop adds an aggressive individual look to your D-Max
Manufactured from a high-quality composite matte black ABS material.
Simply clean and dry the bonnet.
Degrease only the 3M tape contact area with alcoholic wipe or brake cleaner Test fit prior to removing the 3M backing tape and mark its location with dots of masking tape Remove the 3M backing tape, re-position and press down firmly.
Rub the outer edges to ensure good consistent adhesion has occurred.
If the outside ambient temperature is below 15 degrees warm the bonnet and the scoop with a hairdryer/heat gun gently just prior to installation.
This promotes improved adhesion.
Want to individualise your D-Max? To view our full range of Isuzu accessories see:
Isuzu D-Max 2021 On 70mm Spoiler Bar with Axle Bars - Colour Choice