Ford Ranger 2023- Tailgate Armour in Matt Black Finish

Ford Ranger 2023 Onwards Tailgate Armour - Matt Black

Looking to add a distinctive look to your Ranger's rear end? Then consider Tailgate Armour!

Finished in a matt black paint finish tailgate armour offers a distinctive look and a degree of protection also.

• Specific to Ranger 2023 onwards
• Matt black finish
• Simple non-drill installation
• Quality ABS composite

Fit time: 30 mins

Installation tips:

1. Simply clean and dry the tailgate.
2. Degrease only the 3M tape contact area with an alcoholic wipe or brake cleaner.
3. Test fit and align prior to removing the 3M backing tape and mark with masking tape or similar.
4. Apply 3M primer to the contact area to promote adhesion.
5. Remove the 3M backing tape, re-position and press down firmly.
6. Rub the outer edges with some force to ensure good consistent adhesion has occurred.
7. If the outside ambient temperature is below 15 degrees warm the contact area and the tailgate armour with a hairdryer/heat gun gently immediately prior to installation.
8. This promotes improved adhesion.
9. Ensure the product is firmly secure before driving.