Ford Ranger 2023 Onwards Tailgate Armour - Agate Black
Looking to add a distinctive look to your Ranger's rear end? Then consider Tailgate Armour!
Finished in a agate black paint finish tailgate armour offers a distinctive look and a degree of protection also.
- Specific to Ranger 2023 onwards
- Agate Black finish
- Simple non-drill installation
- Quality ABS composite
Fit time: 30 mins
Installation tips:
- Simply clean and dry the tailgate.
- Degrease only the 3M tape contact area with an alcoholic wipe or brake cleaner.
- Test fit and align prior to removing the 3M backing tape and mark with masking tape or similar.
- Apply 3M primer to the contact area to promote adhesion.
- Remove the 3M backing tape, re-position and press down firmly.
- Rub the outer edges with some force to ensure good consistent adhesion has occurred.
- If the outside ambient temperature is below 15 degrees warm the contact area and the tailgate armour with a hairdryer/heat gun gently immediately prior to installation.
- This promotes improved adhesion.
- Ensure the product is firmly secure before driving.
*Note*: Images show the matt black variant.
;){kind=link}