Ford Raptor 2023- Bonnet Scoop - Colour Choice Option

Ford Raptor 2023- Bonnet Hood Scoop - Colour Choice Option

Bonnet styling, custom-made to fit the Ford Raptor. Take pickup customisation to another level with this easy-to-fit bonnet scoop, it completes the vehicle transformation and adds a menacing appearance.

Vented Bonnet Scoop Features

• Full-width style
• Colour choice option
• Quality composite
• Easily installed
• Bonnet guard compatible

Make your Raptor stand out, with a more aggressive look. This single skinned ABS composite vented bonnet scoop, finished in full Matt black single colour paint or two-tone colour choice and easily fitted within 30-mins, will individualise your Raptor.

Use the Drop-Down to Select Colours

Choose from:

• Full Matt black single-colour paint finish
• Two-tone Metallic black with contrasting Matt black
• Two-tone Blue Lightning & Matt Black

Installation Tips:

1. Simply clean and dry the bonnet.
2. Degrease only the 3M tape contact area with an alcoholic wipe or brake cleaner.
3. Apply 3M primer to promote adhesion test fit prior to removing the 3M backing tape and mark its location with lots of masking tape.
4. Remove the 3M backing tape, re-position and press down firmly.
5. Rub the outer edges to ensure good consistent adhesion has occurred.
6. If the outside ambient temperature is below 15 degrees warm the bonnet area and the scoop with a hairdryer/heat gun gently prior to installation. This promotes improved adhesion.
7. Ensure the product is firmly secure before driving.