Looking to add a distinctive look and some protection to your Ranger? Then consider Door Armour.
Finished in a matt black paint finish (See our painted option listing) Door armour offers a distinctive look and a degree of protection from knocks and scrapes also.
Fit time: c.45-mins
Installation tips:
Simply clean and dry the lower doors.
Degrease only the 3M tape contact area with an alcoholic wipe or brake cleaner.
Test fit and align prior to removing the 3M backing tape and mark with masking tape or similar.
Apply 3M primer to the contact area to promote adhesion.
Remove the 3M backing tape, re-position and press down firmly.
Rub the outer edges with some force to ensure good consistent adhesion has occurred.
If the outside ambient temperature is below 15 degrees warm the contact area and the door armour with a hairdryer/heat gun gently immediately prior to installation.
This promotes improved adhesion.
Ensure the product is firmly secure before driving.
Land Rover Defender 110 2020- Dark Smoked Wind Deflectors - Set of 4