10+ in Stock
Bonnet styling, custom-made to fit the Ford Ranger. Take pickup customisation to another level with this easy-to-fit vented bonnet scoop, it completes the vehicle transformation and adds a menacing appearance.
Make your Ranger stand out, with a more aggressive look. This single skinned ABS composite vented bonnet scoop, finished in matt black (See our other listing for two-way colour coded version) and easily fitted within 30-mins, will individualise your Ranger.
Installation tips:
Simply clean and dry the bonnet
Degrease only the 3M tape contact area with an alcoholic wipe or brake cleaner Apply 3M primer to promote adhesion test fit prior to removing the 3M backing tape and mark its location with lots of masking tape Remove the 3M backing tape, re-position and press down firmly.
Rub the outer edges to ensure good consistent adhesion has occurred.
If the outside ambient temperature is below 15 degrees warm the bonnet area and the scoop with a hairdryer/heat gun gently prior to installation. This promotes improved adhesion.
Ensure the product is firmly secure before driving.
Ford Ranger 2019 - 2022 T6 P375 Tyre Valve with Wheel Pressure Sensor
;){kind=link}